Aluminum Road Lever Boss set
- Can be used for either 6061 or 7005
- This set is to be assembled with a good epoxy adhesive such as 3M DP460 and the threaded rod.
- The aluminum "clams" are radiused to fit a 40.00 diameter tube but can be used on tubes from 35mm - 44.5mm without modification.
- If it is to be used with a 50.8mm downtube it must be re-radiused.
- The black boss pieces are 8mm/0.315 in diameter. Check the hole size in the frame.
- An easy way to do this is to use your downtube as a mandrel surface and attach a piece of sandpaper with tape. Then sand the small discrepancy out of the "clams".
PRICED & SOLD INDIVIDUALLY